Logotype Partner program

Certified partners will be named as shown in this example.
Certified partners are allowed to use these logotypes in addition to their own logo. They are to be used in accordance with the partners level in the partnerprogram.
Files containing partnerlogos are located on the Visma intranet.
Please use these files to avoid mistakes.

Partner... setup

Example 1:

Use of certified partner logo on printed media from partners – portrait logo
Partner’s logo should be significantly larger than the certified partner logo, to state clearly that this is printed media from the partner. The logos should be placed as shown.
The height of partner’s logo should not exceed 20 mm. The lower edge of the logo should be placed at the same height position as the certified partner logo. The height of the certified partner logo should be 50% of partner’s logo.
Assure that the certified partner logo has a minimum height of 5 mm.

 

 

 

 

 

Example 2:

Use of certified partner logo on printed media from partners – landscape logo
Partner’s logo should be significantly larger than the certified partner logo, to state clearly that this is printed media from the partner. The logos should be placed as shown.
The width of partner’s logo should not exceed 50 mm. The lower edge of the logo should be placed at the same height position as the certified partner logo.
The width of the certified partner logo should be 50% of partner’s logo.
Assure that the certified partner logo has a minimum height of 5 mm.